Technical Assurance of Metering Authorisations

v 5.0

Effective From Date:31/07/2019

Status:LIVE

Download

Technical Assurance of Metering Authorisations

Guidance Note

The Balancing and Settlement Code (BSC) requires the Registrant of the Metering System to provide the Technical Assurance Agent (TAA) with access to the Metering System so that it can carry out a TAA Inspection Visit. The Registrant may not necessarily be the Equipment Owner for all or part of the Metering System, where this is the network operator (Distribution or Transmission company), authorisation is required from them (for the TAA) to carry out inspections on the network operator’s assets.

Each network operator has different requirements before they grant authorisation to the individual inspector. Most require completion of some form of Health and Safety training course provided by the network operator, in addition to holding a current first aid certificate. Others provide authorisation based on the condition that a suitably authorised MOA accompanies the inspector on-site.

The table below shows the organisations where the identified TAA Inspector has been provided with the relevant authorisation in order to undertake the necessary work associated with the Technical Assurance of Metering.

LDSO MPID	Organisation	Tony Dunne	Paul Gregory	Gary Jones	Bill McFarlane
NEEB	CE Electric	P	P	P	P
YELG	CE Electric	P	P	P	P
EMEB	Central Networks	P	P	P	P
MIDE	Central Networks	P	P	P	P
EELC	UK Power Networks	P	P	P	P
LOND	UK Power Networks	P	P	P	P
SEEB	UK Power Networks	P	P	P	P
MANW	Scottish Power	P	P	P	P
SPOW	Scottish Power	P	P	P	P
SWAE	Western Power	P	P	P	P
SWEB	Western Power	P	P	P	P
SOUT	SSE	P	P	P	P
HYDE	SSE	P	P	P	P
NORW	ENWL	P	P	P	P
	National Grid	P	P	P	P
EUSR	BESC	P	P	P	P

IDNO MPID	Organisation	Tony Dunne	Paul Gregory	Gary Jones	Bill McFarlane
LENG	ESP Electricity	P	P	P	P
ECTL	Brookfield	P	P	P	P
IPNL	Brookfield	P	P	P	P
EDFI	UP Power Networks	P	P	P	P
GUCL	Energetics	P	P	P	P
UDNL	Dragon	P	P	P	P
HARL	Harlaxton	P	P	P	P
PENL	Peel	P	P	P	P
UKPD	UK Power Distribution	P	P	P	P
GGEN	G2 Energy	P	P	P	P
WINDA	Off-shore		P	P

If there is a requirement for your organisation to have visibility of the authorisation certificates, you may request a copy. Any request must be received in writing on your company letter headed paper, include an explanation of why you require a copy, signed by a company director or equivalent. Send the letter to: Technical Assurance, C&C Group, 7 & 8 Delta Bank Road, Metro Riverside Park, Gateshead,NE11 9DJ.

Need more information?

For more information please contact Technical Assurance of Metering at tametering@elexon.co.uk

For all other queries, please contact C&C Group at TAA_service@candc-uk.com or call 0203 086 7205.

Or contact the BSC Service Desk or call: 0370 010 6950.

Intellectual Property Rights, Copyright and Disclaimer

The copyright and other intellectual property rights in this document are vested in Elexon or appear with the consent of the copyright owner. These materials are made available for you for the purposes of your participation in the electricity industry. If you have an interest in the electricity industry, you may view, download, copy, distribute, modify, transmit, publish, sell or create derivative works (in whatever format) from this document or in other cases use for personal academic or other non-commercial purposes. All copyright and other proprietary notices contained in the document must be retained on any copy you make.

All other rights of the copyright owner not expressly dealt with above are reserved.

No representation, warranty or guarantee is made that the information in this document is accurate or complete. While care is taken in the collection and provision of this information, Elexon Limited shall not be liable for any errors, omissions, misstatements or mistakes in any information or damages resulting from the use of this information or action taken in reliance on it.

CONTENTS

Technical Assurance of Metering Authorisations

Need more information?